Care And Cleaning; Troubleshooting - Klarstein 10031689 Manual De Instrucciones

CARE AND CLEANING

• Before cleaning remove the plug from the power outlet. Never use harsh, abrasive
claaners, heavy-duty cleaners, or solvenls on any surface.
• Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for
periodic waxing use silicon wax.
• Refrigeration Section: Wash shelves and other removable parts in warm sudsy
water. Rinse and dry. Wash interior with baking soda solution (3 tablespoons to 1
liter of water) or warm sudsy water, rinse and dry.
• Magnetic Door Seals: Wash with warm sudsy Water.
• The Finishing Touch: Replace all parts and retum thermostat dial to desired setting.

TROUBLESHOOTING

Problem Possible Cause
No cooling. Plug not put in.
Low voltage.
Fuse broken.
Not cold The refrigerator is placed too
enough near heat source.
temperature
inside.
Bad ventilation.
Fans don't work.
The door is not closed tightly
or opened too frequently or for
too long time.
Peculiar Check whether there is any sour
smell inside inside.
Refrigerator.
Suggested Solution
Put in the plug.
Ensure normal voltage.
Change fuse.
Keep the refrigerator away
from sunshine or other heat
source.
Place the refrigerator in the
area with good ventilation and
keep things away from the fans;
Check whether the plug is
connected or change the fan.
Close the door tightly and don't
open the door too frequently or
for too long time.
Wrap the source or take it out
EN
21