Riester ri-focus LED Instrucciones Para El Uso página 18

2.3.8 Lamps
Exchanging the lamp
® ®
ri-focus ri-focus reverse
Unscrew the front part of the lamp head and carefully pull the lamp together with the
ceramic base out of the connecting socket.
Push a new lamp into the ceramic base and then place the complete unit back into
the lamp fixture. Care should be taken not to touch the glass body of the new lamp
with the fingers!
ri-clar ® 55/100 mm
Turn the lamp away from the mirror with the help of the adjustable lamp joint.
Unscrew the protective cover with a slotted screwdriver and remove it.
Take the lamp out by turning it and replace it with a new lamp. Put the protective
cover back and screw into place.
clar N 55/100 mm
Turn the lamp away from the mirror with the help of the adjustable lamp joint
(enlarge the clearance). The lamp can then be unscrewed and a new lamp screwed
back into place.
Attention!
Allow the lamp to cool down first before exchanging the lamp!
2.3.9 Operation of the battery charger
ri-focus ® LED and clar N 55/100 mm
Plug the charger into the mains socket and then connect it to the battery compartment.
As soon as a connection to the battery compartment has been made, the charging
indicator of the unit lights up and the rechargeable batteries will be charged up.
Charging time:
18
First charge minimum 24 hours.
Following charges are possible over night or as required.