Replacement Parts; Technical Data; Maintenance; Disposal - Riester ri-focus LED Instrucciones Para El Uso

Wipe disinfection according to the regulations given by the disinfectant manufacturer. Only disinfectants with approved
efficiency and in accordance with the national standards can be used.
After disinfection the device must be cleaned with a humid cloth to remove all possible deposits of disinfectants.
Caution!
Never place the head mirror and headlights in liquid!
The items are not permitted for machine cleaning and sterilisation as they will damaged!

3. Replacement parts

Halogen illumination
Art. No. 11320 1 replacement bulb 6 V for ri-clar
Art. No. 11321 1 replacement bulb 8 V for ri-focus
LED illumination
Art. No. 11302 Lamps 6 V for clar N LED
Standard illumination:
Art. No. 11301 Pack of 6 lamps à 6 V for clar N vacuum

4. Technical data

Models: clar N vacuum 55/100 mm, clar N LED 55/100 mm
ri-clar
ri-focus
Energy sources: See remarks on the respective mains device or on the batteries, rechargeable batteries
Initial values: According to the details on the mains devices or the batteries used
Working temperature: +10 to +40°, relative air humidity between 30 and 75% (non-condensing)
Storage location: -5°C to 50°C, up to 85% relative air humidity, non-condensing

5. Maintenance

The instruments and their accessories do not require any special maintenance. If an instrument has to be checked for
any reason, send it to us or to an authorised RIESTER dealer near you, who we shall be pleased to name upon request.

6. Disposal

Please note that batteries and electrical appliances have to be disposed of in a special way. You can obtain information
about this from municipal collection points.
Manufacturer: see last page of these Instructions for Use.
20
55 and 100 mm
®
® and ri-focus
® 55/100 mm,
® , ri-focus ® reverse, ri-focus
® reverse
® LED