Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL THE BATTERY
SAFETY WARNING: ALWAYS REMOVE THE LIGHT FROM ANY FIREARM BEFORE CHANGING
THE BATTERY.
Unscrew and remove the bezel.
y
I nserttheincludedCR123Abatterywiththepositive(+)endfirst.
y
Replace the bezel and tighten until fully seated. You will feel a resistence as you tighten past the
y
lockout detent. Continue tightening until the dot on the bezel aligns with the ON position.
SAFE MODE: To disable the battery and prevent the light from unintended activation, turn the bezel
counter-clockwise until the mark on the bezel aligns with the OFF position.
INSTALL THE LGC ONTO YOUR LONG-GUN
NOTICE: ThefirearmmusthaveanavailablesectionofPicatinnyrail.
P ushinwardontherailclamptensionthumbscrewtofullyopentherailclamp.
y
A ligntheinserttabwiththeappropriateslotonthePicatinnyrailofyourfirearm.Rotatetherail
y
clampoftheLGContothePicatinnyrailsothattheinsertisfullyseatedintheslot.
While making sure that the insert remains fully seated in the slot, fully tighten the rail clamp tension
y
thumbscrew using a small coin.
IMPORTANT:PeriodicallychecktheAllenscrewsontheinsertandtherailclamptensionthumbscrew
for tightness.
OPERATION
To activate battery, the mark on the bezel must be aligned with the ON position. The left and right
switches operate independently.
Turn on/off: Quick press and release.
y
Momentaryon:Pressandholdfor.5secondsorlonger,releasetoturnoff.
y
Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.nightstick.com
Quick Start Guide
LGC-550XL
Compact Long-Gun Light
US PATENT 9,713,217
QSG-LGC-550-20
Publicidad
