Hammerhead HDIW075 Manual Del Usuario página 12

OPERATING INSTRUCTIONS
5. Before Each Use
a. Inspect the impact wrench, the On/Off switch, the cord and the accessories for
damage.
b. Check for damaged, missing, or worn parts.
c. Check for loose screws, misalignment or binding of moving parts, or any other
condition that may affect the operation.
d. If abnormal vibration or noise occurs, turn the tool off immediately and have the
problem corrected before further use. Unplug the tool from the power source before
cleaning or performing any maintenance. Using compressed air may be the most
effective cleaning method. Always wear safety goggles when cleaning tools using
compressed air.
WARNING: Do not allow brake fluids, gasoline, petroleum-based products,
penetrating oil, etc. to come into contact with plastic parts. These substances contain
chemicals that can damage, weaken, or destroy plastic.
WARNING: When servicing, use only identical replacement parts. The use of any
other parts may create a hazard or cause damage to the product.
WARNING: If the supply cord is damaged, it must be replaced by a specially
prepared cord available through the service organization.
WARNING: Use only accessories that are recommended for this impact wrench by
the manufacturer. Accessories that may be suitable for one tool may become hazardous
when used with another tool.
WARNING: To ensure safety and reliability, all repairs should be performed by a
qualified service technician.
12 7.5 AMP IMPACT WRENCH