Care And Maintenance; Troubleshooting; Warranty - Hammerhead HDIW075 Manual Del Usuario

CARE AND MAINTENANCE

All maintenance should only be carried out by an authorized service organization.
Cleaning
Before cleaning or performing any maintenance, unplug the impact wrench from the power
source. For safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your impact wrench; never use detergent or
alcohol.

TROUBLESHOOTING

PROBLEM
The impact wrench does
not work
Socket cannot be installed Improper socket selection
The motor is overheating
3 YEAR LIMITED WARRANTY
This impact wrench is warranted to the original purchaser from the original purchase date for
two years, plus one additional year with product registration at www.hammerheadtools.com
(2+1), for a total three years subject to the warranty coverage described herein.
Please retain your receipt.
This impact wrench is warranted to the original user to be free from defects in material
and workmanship. If you believe that the impact wrench is defective at any time during the
specified warranty period, call HAMMERHEAD support at 1-877-888-1880 to speak with a
customer service agent. This warranty does not cover: (1) Part failure due to normal wear or
tool abuse (2) Any parts have been altered or modified by anyone other than an authorized
HAMMERHEAD personnel.
This warranty excludes bits, bulbs and accessories. This warranty gives you specific legal
rights, and you may also have other rights that vary from state.
7.5 AMP IMPACT WRENCH
POSSIBLE CAUSE
The impact wrench is not
plugged into a power source
Cooling vents are obstructed Clean and clear vents. Do
CORRECTIVE ACTION
Plug the impact wrench into
an appropriate power source
Use a suitable socket
not cover with hand during
operation
13