KTM Power Parts 93012955044 Manual De Instrucciones página 12

- Take piston rod out of the cartridge.

Assembling the fork legs
NOTE
The operations are the same on both fork legs.
- Slide bushing (included) onto the piston rod.

- Slide piston rod into the cartridge.

- Clamp the cartridge with the special tool.
Clamping stand T14016S
- Mount fl uid barrier all the way on.

NOTE
The fl uid barrier must be tightened all the way. Do not use a tool.
- Clamp the cartridge with the special tool.
Clamping stand T14015S
- Mount compression adjuster
- Mount compression holder
- Mount lock ring .

.

.

12