Descargar Imprimir esta página
Graco Comfort Sport Guia De Inicio Rapido
Ocultar thumbs Ver también para Comfort Sport:

Publicidad

Enlaces rápidos

To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
You will receive ONE of
these Graco approved
replacement buckles.
Follow instructions for
proper installation.
4
Remove chest clip.
DO NOT DISCARD the
chest clip.
7
Slide NEW buckle onto
harness straps. MAKE
sure not to twist straps.
10
Re-insert straps back onto splitter plate.
See carseat owner's manual for inserting the
splitter plate into the correct set of loops for
your child.
Comfort Sport
1
To loosen straps, lift lever
and pull harness straps.
5
8
Re-attach chest clip.
MAKE sure not to
twist straps.
®
Classic Ride
Buckle Replacement Guide
2
Remove harness
strap loops from
splitter plate.
Unbuckle harness by
tilting top of buckle
down, press top of red
button, and pull
tongues out of buckle.
9
Re-insert straps through slots
See carseat owner's manual for inserting
the straps into the correct set of harness
Turn page over to
fi nish the rest of
the assembly
Steps 11 to 19
for the buckle
replacement.
®
Ready Ride
©2014 Graco PD272718B 5/14
3
Pull harness straps
through seat back
and seat pad.
6
Remove and discard
tongues.
in seat pad and seat back.
slots for your child.
®

Publicidad

loading

Resumen de contenidos para Graco Comfort Sport

  • Página 1 ® ® Comfort Sport Classic Ride Ready Ride Buckle Replacement Guide ©2014 Graco PD272718B 5/14 To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle Remove harness strap loops from splitter plate. You will receive ONE of these Graco approved Pull harness straps replacement buckles.
  • Página 2 • Tug on the buckle to be sure it is properly secured in the In USA: bottom of the seat and does Graco Children’s Products not come out. 3 Glenlake Parkway • MAKE SURE the harness Atlanta, GA 30328 • 1-800-345-4109 straps are not twisted.
  • Página 3 Guide de remplacement de la boucle Comment retirer la boucle et les languettes existantes et installer la boucle de rechange Vous allez recevoir UNE de ces boucles de rechange Graco approuvées. Suivre les directives pour une installation adéquate. 1. Pour desserrer les courroies, soulever le levier et tirer sur les courroies du harnais.

Este manual también es adecuado para:

Classic rideReady ride