Product Information - bloom alma max Manual Del Usuario

eng

Product Information

This crib has been designed and tested to
ensure compliance with the latest relevant safety
standards.
• Newborn to school-age convertibility – from
crib to toddler bed
• Folding design for easy storage – no small
parts to lose
• 2 different mattress platform heights for easy
access to newborn baby
• Contemporary design
• 4 lockable castors included
Model No.: U10351/E10352
Patents Pending
Colour & contents may vary
NOTE: Adult assembly required.
If refinishing, use a nontoxic finish specified for
children's products.
10
Instructions For Safe Use – Please read
carefully and keep for future reference
The correct use and maintenance of your baby
crib bed will ensure it gives long and trouble-
free use. When somebody else is using your
crib bed please ensure they also know how to
use it, how to adjust it and the necessary safety
precautions. The safety of your child is your
responsibility.
Select base board level
The base board can be set at different heights.
Currently the base board stays are pre-
assembled onto the alma max panels at the
UPPER position. This position should ONLY be
used for babies from new born to approximately
6 months old or until can sit up unaided.
WARNING
TO PREVENT FALLS, THE MATTRESS BASE OF THIS
Crib SHOULD BE ADJUSTED TO THE LOWEST
POSITION BEFORE THE CHILD CAN SIT UP.
1 - 10 Crib Set Up
– (#02 side panels, #04a & b side stays, #07
tool – hex key, #08 bolts) assemble the 4 side
stays onto the upper level of the side panels
by tightening the bolt using the tool included
(hex key). You will find the hex key enclosed
with the castors. (refer to illustration 1 & 2)
– (#01 end panel, #02 side panels, #07 tool –
hex key, #08 bolts) Join two side panels to
one of the end panel by tightening the bolts