Product Information; Patent Pending; Important; Shaft Housing - bloom fresco Guia Del Usuario

eng

Product Information

This baby chair has been designed and tested to
ensure compliance with the latest relevant safety
standards.
This baby chair is designed with multiple
configurations of use for babies and toddlers
from newborn to 36 kg/79 lbs:
– cradle mode: from 0 to 6 months
– highchair mode: from 6 to 36 months
– toddler chair mode: from 36 months to
36 kg/79 lbs
Model No.: U050 / U0505

PATENT PENDING

Colour & contents may vary

Instructions for Safe Use – Please read
carefully and keep for future reference
The correct use and maintenance of your baby
chair will ensure it gives long and trouble-free
use. When somebody else is using your baby
chair please ensure they also know how to use
it, how to adjust it and the necessary safety
precautions. The safety of your child is your
responsibility.
Section A: Basic Assembly (refer to
illustrations section a)
a Swivel/Height Resistor

IMPORTANT!

The resistor is designed to prevent inadvertent or
free spinning, however with adult force it is still
possible to rotate the seat unit.
To engage
Press metal lever inwards, until it sits flush with
the plastic housing. Check the device is engaged
by turning the seat unit.
To disengage
Pull the metal lever outwards fully. Check the
device is disengaged by turning the seat unit.
(#01 swivel shaft, #14 swivel shaft housing)
Insert the swivel shaft all the way into the swivel
shaft housing (make sure swivel resistor is
disengaged). Engage swivel resistor.