Side Discharge Deflector - Briggs & Stratton BRUTE 7800743 Manual Para El Operador

Assembly
Attaching the Side Mounted Discharge Deflector
WARNING: To prevent the engine from
starting, disconnect the wire from the
spark plug.
For shipping purposes, the side deflector was not installed.
Locate the side deflector and install as follows.
1. Raise the mulcher cover (A, Figure 10).
2. Attach the side deflector (B). Make sure the locking tabs
(C) go through the slots in the side deflector.
3. Lower the mulcher cover (A, Figure 11).
4. Attach the wire to the spark plug.
10
B
C
Figure 10: Installing the side discharge deflector
A
Figure 11: Releasing the mulcher cover
A
www.brutepower.com