Safety Information - BGS technic 62616 Manual De Instrucciones

TOOLS
1 Timing chain counter-holder, to be used as OEM BMW 113360 / Range Rover LRT-12-115
2 Camshaft locking tool, to be used as OEM BMW 116321 (116320) / Opel KM6267
3 Holder for camshaft locking tool, to be used OEM BMW 116322 (116320)
4 Injection pump puller (long) , to be used OEM BMW 135120
Injection pump puller , to be used OEM BMW 135120 / Range Rover LRT-12-119
5
Injection pump puller (short) , to be used OEM BMW 135191, 135192 (135190) / Opel KM6270
6
7 Threaded ring, to be used OEM BMW 135191, 135192 (135190) / Opel KM6270
8 Camshaft locking tool, to be used OEM BMW 113320 / Rover LRT-12-112
Crankshaft locking pin , to be used OEM BMW 115180
9
10 Crankshaft locking pin , to be used OEM BMW 116080
11 Tensioner locking pin, to be used OEM BMW 113340 / Range Rover LRT-12-114 / Opel KM-823
12 Crankshaft locking pin , to be used OEM BMW 112300 / Range Rover LRT-12-108
INDENDED USE
This engine timing tool kit is used to set engine timing on BMW 2.0, 2.5 & 3.0L 4- & 6-cylinder Diesel
engines M41, M51, M47, M47 TU/T2, M57 TU/T2. The included tools are also suitable for Rover, Range
Rover, Land Rover Freelander and Opel (Vauxhall) Omega-B with identical Diesel engines 204D3
(Td4, Td6) und M47R.
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATION

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set for BMW
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 62616
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed