Pentair PENTEK WELL DEFENDER Guia De Inicio Rapido página 4

4
Pair Pentair Pentek ® Well Defender to Router via Web Browser
6. Open any web browser (i.e. Chrome®,
Safari®, etc.) on your mobile device to
pair the Pentek Well Defender to the
router.
7. Type 192.168.1.1 into the address bar
and press Enter. This will take you to
the main page for pairing the unit and
mobile device.
8. Click on SETTINGS.
9. Select the router from the drop
down SSID list and enter the router
password into the security key field.
Passwords are case sensitive.
10. Click the ADD button to save this wifi
network in the device.
11. Scroll down to System Settings area.
Verify Upper and Lower Pressure

Settings values are correct.
Maximum value for the Upper
Pressure Setting is 100psi.
Enter the pump motor's Service

Factor Amps (SFA back the closing
parathesis value. Maximum value
is 12A.
12. Click APPLY.
PENTEK WELL DEFENDER QUICK START GUIDE