General Rules Applied; Warranty; Description; Operation - Piusi HC Instalación Uso Y Mantenimiento

This manual is giving information about a correct assembly, use and maintenance of the hose reels in
order to prevent accidents.
The hose reel has been designed in conformity to the present EEC rules and namely:
- UNI EN ISO 12100-1:2010 - UNI EN ISO 12100-2:2010 Safety of machinery: Basic concepts, ge-
neral principles for design - Basic terminology, methodology and technical principles
- UNI EN 13857:2008 Safety of machinery: Safety distances to prevent hazard zones being reached
by upper and lower limbs.
The equipment is guaranteed for a limited period from date of purchase and must be used in accordance
with the instructions contained in this manual. Warranty does not cover all parts which are faulty after
incorrect use, incorrect installation or maintenance, maintenance carried out by unauthorized person-
nel, transport damages, or for circumstances not concerning manufacturing defects. The manufacturer
disclaims any responsibility for any damage, that may directly or indirectly, derive to persons or property
in consequence to the not observed requirements specified in this instruction manual and especially the
warnings regarding installation, use and maintenance.
The hose reels are made of hot galvanized moulded steel and painted with electrostatic polyester
powder system in order to guarantee a long life of the product.
The hose rolling is done automatically by a spring made of high quality iron, incorporated in the drum.
The stop can be done at any desired length, through an automatic locking device.
The hose reels supplied without hose are provided with the unloaded spring. Follow the instruc-
tions described at the chapter "HOSE ASSEMBLY".
The automatic device stopping the hose works on an area corresponding to 1/3 turn of the drum. To
release the hose, put a light traction on it.
It is important always to keep the hose back when you rewind it, in order to avoid
damages to the machine, injuries to people or to surrounding things

5 - INTENDED USE OF THE MACHINE

The hose reels of the painted series are suitable for distributing compressed air, oil, grease, water at
low and high temperature.
According to the EEC rules these hose reels have not to be placed in areas where they might be in
contact with food products.
All the hose reels have to be used only for distributing fluids, at the pressures and temperatures
indicated on the schedule. Every hose reel code is corresponding to a different kind of fluid.
It is forbidden to use the machine for any other kind of fluid.
We decline any responsibility for anomalies or dangers which could arise by a hose assembly with cha-
racteristics and uses different from the ones described herein.
• Avoid to get on the machine or to lay any kind of material on it.
• Check periodically the correct operation of the hose reel, and control that the couplers are well locked
and there are no fluid losses.
• It is forbidden to remove the side access door when using the hose reel.
• Close the feeding of fluid at the shift end to avoid damages during non-working hours.
• Use of the hose reel is not permitted in potential explosive environments (ATEX).
ENGLISH - Translated from Italian

1 - GENERAL RULES APPLIED

2 - WARRANTY

3 - DESCRIPTION

4 - OPERATION

- 10 -
.