Germ Guardian AC5000 Instrucciones De Uso Y Cuidado página 5

INSTALLING & REMOVING UV-C bULb
1. Remove the Rear 2. After removing
Cover of the unit the Rear Cover
by pushing Lock & from the unit,
Release Button. remove the
Combination Filter.
4. The UV-C Bulb is removed by carefully grasping the bulb with a clean cloth or tissue and
pulling the bulb straight out of the unit. (Fig. 4).
bulb is NOT visible
until the UV-C METAL
SHIELd has been
removed.
FIG. 4
5. The UV-C Bulb is reinstalled by sliding it, horizontally, back into the slots at the top of the unit. .
E-8
3. After removing the
Combination Filter,
use a Philips head
screwdriver to
remove four (4)
screws and detach
the UV-C Metal
Shield.
TWIST bULb
1/4 TURN TO
REMOVE.
REPLACEMENT bULb: Lb5000
AVAILAbLE AT 866.603.5900 OR
WWW.GUARdIANTECHNOLOGIES.COM
CLEANING & MAINTAINING
THE COMbINATION FILTER
The air purifier should be cleaned at least once every month and the outer Pre-/
Charcoal Filter attached to the HEPA Filter should be cleaned every month. More frequent
cleaning may be required depending on environmental conditions.
PRE-/CHARCOAL FILTER
Clean with the brush attachment of your vacuum cleaner. This will remove lint and dirt.
TRUE HEPA FILTER
Remove the Combination Filter from the back of unit.
Remove the Pre-/Charcoal Filter to expose the HEPA Filter.
When the HEPA Filter turns from white to grey or black it should be replaced with
a new one. If the HEPA Filter is still white, it does NOT need to be replaced.
IMPORTANT
:
Do NOT try to wash and re-use the Combination Filter. Please contact
Customer Service at 1.866.603.5900 or visit us at www.guardiantechnologies.com to
purchase a replacement filter.
Replacement filter: FILTER C (FLT5000 or FLT5111)
NOTE
: The Combination Filter is one filter system. The multiple layers include: the
Pre-/Charcoal Filter and the True HEPA Filter.
AIR PURIFIER
Use a clean, dry, soft cloth to wipe the external surface of the unit.
E-9