Klarstein CLEARCUBE Manual De Instrucciones página 19

OPERATION
Unpacking your ice maker
1. Remove the exterior and interior packaging. Check that ice basket and ice
scoop is included. If any parts are missing, please contact our customer
service.
2. Clean the interior with lukewarm water and a soft cloth. Take out the ice
basket and clean it
3. Find a location for your ice maker that is protected from direct sunlight and
other sources of heat (i.e.: stove, furnace, radiator). Place the ice maker on a
level surface. Maker sure that there is at least 6 inches of space between the
back and sides of your ice maker and the wall.
4. Allow one hour for the refrigerant fl uid to settle before plugging ice maker in.
5. The appliance must be positioned so that the plug is accessible.
Note: Fill with potable water only.
Connecting your ice maker
CAUTION
Risk of injury! Improper use of the earthed mains plug may result
in electric shock. If the power cord is damaged, contact your
service representative.
1. This unit should be properly grounded for your safety. The power cord of
this appliance is equipped with a grounding plug which mates with standard
grounding wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounding wall
outlet. Do not under any circumstances, damage the grounding means of
the plug under any circumstances. Any questions concerning power and/or
grounding should be directed toward a certifi ed electrician.
3. This appliance requires a standard 220-240 Volt, 50 Hz electrical outlet with
good grounding means.
EN
19