Style selections 1211VA-24-242 Manual De Instrucciones página 5

INSTALLATION INSTRUCTIONS
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
2. With the help of another adult, carefully place
vanity (A) against the wall in its final location.
From inside vanity (A), drill hole through vanity
mounting area and into wall studs. Using
mounting hardware (not included) appropriate
for your installation site, secure vanity (A) to
wall stud. If possible, secure vanity (A) to
two wall studs for increased stability.
Note: Use preassembled levelers on legs of
vanity (A) to level the item. Twisting the
levelers counterclockwise will increase the
height of vanity (A), twisting them clockwise
will decrease it.
WARNING
Vanity (A) MUST be secured to wall.
3. Apply stain free silicone or latex adhesive (not included)
to the top edge of vanity (A). With the help of another
adult, gently lower top (B) onto the vanity (A). Wipe
away any excess adhesive with a soft cloth, and wait
approximately 24 hours for it to dry.
1334VM-24-251-2
2
1334VM-24-251-3
3
5
A
1
B
2
2
A