Install The Pet Door; Train Your Pet - Petsafe Large Pet Screen Door Guia De Instalacion

Step 4

Install the Pet Door

4A. After cutting the opening in the screen, place the Exterior Frame on top of the Interior Frame.
4B. Use a rubber mallet and tap the two frames together until fully seated. Make sure you have a solid surface
under the door to support it while the frames are assembled. Use a Phillips screwdriver to screw the two frames
together using the six included flat-head screws.
4C. Place the screen door back on the hinges.
4A
Step 5

Train Your Pet

5A. Rehang your door and begin training your pet. It may help for you to be on
one side of the door and your pet on the other. Lift or tape open the flap and
try to talk your pet through the pet door. After your pet has gone through
a few times, allow the flap to touch your pet's back so they will become
comfortable using the pet door. If your pet will not go through the door, tape
the flap open until they use it on their own. Do not use the locks until your pet
is familiar with using the pet door.
Helpful Tip: Try treats or toys to encourage your pet to go through the pet
door and become comfortable using it.
6
Installer can put a small bead of silicone caulk in each corner of the Interior Frame
before installation.
It is not recommended to use the locks if your pet is forceful when using the Pet Screen
Door to keep from damaging your screen or the pet door.
4B
Customer Care Center 1-800-732-2677
4C
5A