Option 3: Optical Digital Connection; Connecting Sacd Player To Hd1500U - Philips SBC HD1500U Instrucciones De Manejo

Option 3: Optical Digital Connection (also referred
to as TOS link)
Connecting the digital wireless base station to:
– CD/ DVD player with Optical digital output available
1 Connect one side of the optical digital audio cable (included) to the output
of the audio source and the other side to the optical digital input
(Digital 2 - IN) of the base station.
2 (Optional) Take the optical digital cable that most likely came with your
audio source. Connect one side of this 2nd optical digital audio cable (not
included) to the optical input of your amplifier or home cinema receiver
and the other side to the optical output (Digital 2 – OUTPUT) of the base
station. When connecting your audio equipment in this way, you will be able
to benefit from the Automatic Audio Signal Routing (AASR) feature. For
graphical illustration, please refer to the Quick Startup / Reference Guide.
For benefits of AASR, please refer to glossary.
IMPORTANT!
• In case of connecting an audio CD player to the HD1500U base station
making use of the CD player's digital outputs, do not up sample the
Audio CD digital output signal higher than 44.1 kHz.
• When connecting a DVD player to the HD1500U base station making
use of the DVD player's digital output, do not upsample the DVD digital
output signal higher than 48 kHz.

Connecting SACD player to HD1500U

Analog connection
1 Philips SACD players come with six analog audio output connectors
(5.1 output). Only connect the Front Left and Front Right outputs.
(Audio cable most likely supplied with your SACD player)
2 Select the Stereo mode or the Dolby Pro Logic mode through the
SACD player menu. Follow the instruction manual of your SACD player to
get access to the TV on screen menu.
ENGLISH 13