Special Instructions - Chaparral 544W Instrucciones Para Armar

544W Monterey Bookcase — Parts List
Before beginning assembly, check that the quantities of the parts received
match those on the parts list below.
B — Sleeper — Qty. 1
I — Left Drawer Side — Qty. 1
J — Right Drawer Side
— Qty. 1
E — Top — Qty. 1
A — Left Side Assembly
— Qty. 1
K — Drawer Bottom — Qty. 1
F — Shelf — Qty. 2
C — Base — Qty. 1
L — Drawer End — Qty. 1
M — Rafix Cam — Qty. 8
G — Back — Qty. 1
N — Rafix Bolt — Qty. 8
O — 3/8" x 1" Wood
D — Right Side Assembly
H — Drawer Front — Qty. 1
Dowel — Qty. 2
— Qty. 1

SPECIAL INSTRUCTIONS

If the top or a panel should become cupped, do not be alarmed. The panel was flat when it
was manufactured. It is a natural characteristic of wood in an unfinished state to cup
from uneven moisture conditions. The Figure at the right shows an exaggerated
view of what could happen. This only means that the convex side has absorbed
moisture, or the concave side has dried out.
Usually a cupped panel will equalize and straighten out if both sides are exposed to similar
conditions for a day or so.
Page 2 – 544W