Activating Or Deactivating The Easy-Start Feature - Philips sonicare DiamondClean Smart Manual De Instrucciones

d. Brushpacer
3
4
e. Easy-start
35_021_2499_1_Booklet_Lux_A6_US_v1.indd 19
2
The brushpacer is an interval timer that has a
short beep and pause to remind you to brush the
1
different sections of your mouth. Depending on the
brushing mode you have selected (see 'Brushing
6
modes'), the brushpacer beeps at different
5
intervals during the brushing cycle.
The Easy-start feature gently increases the power
over the first 14 brushings to help you get used
to the brushing with the Philips Sonicare. The
Easy-start feature works in all modes other than
TongueCare+ mode. This Philips Sonicare model
comes with the Easy-start feature deactivated.
Activating or deactivating the Easy-start
feature
1 Place the handle in the plugged-in charger.
2 Easy-start is enabled by holding the mode/
intensity button and by pressing the power
button once while on the charger.
3 Easy start is disabled by holding the mode/
intensity button and by pressing the power
button once while on the charger.
Note: Using the Easy-start feature beyond the
initial ramp-up period is not recommended and
reduces Philips Sonicare effectiveness in removing
plaque.
Note: Each of the first 14 brushings must be at least
1 minute in length to properly move through the
Easy-start ramp-up cycle.
Note: To achieve clinical efficacy, Easy-start needs
to be deactivated.
19
English
19/01/17 13:34