HAMPTON BAY 51563 Guía De Uso Y Cuidado página 13

Assembly - Attaching the Lights
2
Installing the bulbs and glass bowl
WARNING: Allow the glass bowl to cool completely before
removing.
WARNING: Over lamping the light kit will result in the lights
shutting down until the proper wattage of bulbs are installed.
Reset the lights by turning off the light kit, replace the bulbs
with the correct wattage bulbs, and turn the light kit back on.
CAUTION: Make sure the power is off before attaching or
removing the glass bowl.
CAUTION: Do not over tighten the hex nut, overtightening the
hex nut may cause the glass to break.
□
Remove the finial and the bottom cover from the threaded
nipple of the light kit fitter assembly (E).
□
With the power off, install the two CFL bulbs (I) by screwing
them into the light bulb sockets.
□
Position the glass bowl (H), re-install the bottom cover over
the threaded nipple, and direct the fan pull chain through the
side hole of the bottom cover.
□
Re-install the finial over the threaded nipple and direct the
light pull chain through the hole of the finial, and tighten the
finial securely.
□
Attach the pull chain extensions (GG) provided to the light
pull chain and fan pull chain.
Assembly - Assembling the Fan Without the Light Kit
1
Assembling the fan without the
light kit
□
In order to use the fan without the light kit, remove the
switch cup cover (WW) from the top of the light kit fitter
assembly (E) by removing the center hex nut inside the
switch cup cover (WW), and then thread the switch cup
cover (WW) off of the threaded nipple on the top of the
light kit fitter assembly (E).
□
Press the plastic plug (FF) into the center hole of the
switch cup cover (WW).
□
Remove the three screws (V V) on the switch cup cover
(WW).
□
Align the three holes in the switch cup cover (WW)
with the three holes in the switch cup of the fan-motor
assembly (D). Make sure the notch in the switch cup
cover (WW) clears the reversing switch in the switch cup
of the fan-motor assembly (D).
□
Re-install the three screws (V V) that were removed in
first step to secure the switch cup cover (WW).
D
E
H
GG
V V
13
Please contact 1-855-HD-HAMPTON for further assistance.
I
D
GG
WW
FF
HAMPTONBAY.COM