Phase Linear PCD163 Manual Del Usario página 11

PCD163
CD PLAYER OPERATING INSTRUCTIONS
Repeat Play Selector (RPT)
14
During disc play, press the RPT button (14) to
repeat the playback of a desired track
("S --RPT" appears on the display panel,
followed by the current track number). Play of
the selected track will continue to repeat until
the Track Repeat function is cancelled by
pressing the RPT button again or by activating
the Scan function, causing the "S -- RPT"
indication to disappear.
Track Scan Select (SCN)
15
During disc play, press the SCN button (15) to
play the first 10 seconds of each track. ("S --
SCN" is displayed with the track number).
When a desired track is reached, press the
SCN button again to cancel the function and
play the selected track. Track Scan mode can
also be canceled by activating the Repeat Play
(14) function.
Disc Eject Button
16
Press the eject button (16) to stop disc play
and eject the disc. The unit will revert to radio
operation. Discs may be ejected with the
vehicle ignition switch on or off. If an ejected
disc is not removed from the disc slot within 10
seconds of being ejected, the disc will be re-
inserted automatically, and the disc symbol will
reappear on the display to show that a disc is
still installed in the unit.
NOTE: To prevent a disc from accidentally
being damaged, always remove the disc
from the unit when disc play is finished.
11