Audio Mute; Auxiliary Input - Phase Linear PCD163 Manual Del Usario

OPERATING INSTRUCTIONS
Manual Tuning Control
6
Turn the manual TUNING control (6) clockwise
to tune upward in frequency on the band in use
or counter-clockwise to tune downward in
frequency. The frequency to which you are
tuned will be shown in digital format on the
display panel. When tuning in a station, always
adjust the control so that the correct broadcast
frequency is shown on the display and you are
receiving a clear signal. If the radio is tuned off-
frequency, you could experience distorted
audio, noise and other reception problems.
Source Button (MODE)
7
The MODE button (7) enables selection of
radio, disc or auxiliary device playback. When a
CD is playing, press the MODE button to revert
to radio operation.

Auxiliary Input

8
To access an auxiliary device:
1. Connect the portable audio player to the
AUX IN interface on the front panel (8).
2. Press the MODE button (7) to select Aux
In mode.
3. Press MODE again to cancel Aux In mode
and go to the next mode.

Audio Mute

9
Press the MUTE ( ) button (9) to mute the
radio volume from the system. "MUTE" will
appear on the display panel and the volume will
be muted. (If you press this button while a CD is
playing, CD play will be paused.) Press MUTE
again, or press the volume +/– buttons (3a and
3b) or the SEL/MENU button (4) to return the
volume level to the setting in use before the
mute function was activated.
3a
BAND
LOUD
SEL/MENU
MODE
3b
7
8
2
MUTE TRACK
RPT SCN
9
PCD163
10
DISP
PCD163
6
AUX IN
8