PRESIDIUM ADAMAS Guía De Usuario página 8

7. During calibration, the Simulant,
Moissanite and Diamond Indicator
lights will each gradually light
up,
beeping, with Diamond LED lights
indicating the ending phase of the
calibration, as shown in Figure 7b.
*Note : Do not lift up the tip from t he
Calibration Disk. Continue to
hold the position.
Diamond
Moissanite
Simulant
Metal
Low Batt
Figure 7
Starting of
calibration
8. When calibration is complete, the
Indicator lights will be fully lit and a
long beep will sound, followed by a
unique dual beep. This indicates that
the tester is fully calibrated and ready
to use.
accompanied by rhythmic
Diamond
Moissanite
Simulant
Metal
Low Batt
Figure 7b
Calibration
Nearing
Completion
8