Tabla De Contenido - Husky HOTC8010BB1S Guía De Uso Y Cuidado

Table of Contents
Table of Contents.....................................................................2
Safety Information...................................................................2-3
Warranty.......................................................................................3
Pre-Assembly............................................................................4
Tools Required...........................................................................4
Hardware Included....................................................................4
Specifications............................................................................4
Package Contents......................................................................5
Safety Information
1. Do not open more than one drawer at a time.
2. Do not let children approach the tool chest / cabinet, power strip
and LED working light.
3. To help prevent the product from tipping, load the product
starting with the bottom drawers.
4. Keep the locking casters brake set unless you are
moving the cabinet. This will help to prevent the product
from rolling.
5. Lock both the lid and all drawers before moving
the cabinet / chest.
6. Do not step in any drawer / drawers.
7. When moving this product, push it rather than pull it .
8. Do not alter this product including power strip and LED working light
in any manner.
Plug and Outlet Safety
WARNING: This product is for use on a nominal 120-volt circuit
and has a grounding plug. Chest/cabinet plugs must match the
outlet. Never modify the plug in any way. Do not use any adapter plugs
with earth (grounded) chest/cabinet power strips. Unmodified plugs
and matching outlets will reduce risk of electric shock.
WARNING: Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There is increased
risk of electric shock if your body is earthed or grounded.
WARNING: Chests/cabinets marked "Grounding Required" have a
power strip with a three wire cord and three prong grounding plug. The
plug must be connected to a properly grounded outlet (See Figure).
If the power strip should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away
from the user, reducing the risk of electric shock. The grounding
prong in the plug is connected through the green wire inside the
cord to the grounding system in the power strip. The green wire in
the cord must be the only wire connected to the
power strip's grounding system and must
ever be attached to an electrically "live"
terminal. Your power strip must be plugged into
an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances.
Assembly.........................................................................6-8
Operation...........................................................................9
Maintenance...................................................................10
Care and Cleaning........................................................10
Service Parts....................................................................11
DANGER: Do not stand on this product. You
may fall or cause the product to tip.
DANGER: Do not move the product prior to closing
and locking all the drawers. The drawers could come
open and make the product unstable and tip.
DANGER: Do not mount this product on a
truck bed or any other moving object.
WARNING: Keep the product on a level
surface
tip if stored or moved on an uneven surface.
WARNING: Be careful when closing the cover.
Remove hands before closing the cover.
WARNING: Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
CAUTION: Do not lift this product directly
with a forklift or tow with any mechanical devices.
CAUTION: Do not exceed the maximum product
weight, including contents. Do not exceed the
maximum weight for each drawer.
See Specifications on page 4.
CAUTION: Only transport this product when
empty. Properly secure when transporting.
WARNING
use, and before putting on or taking off parts.
WARNING
surfaces.
2
.
The product may become unstable and
:
Unplug from outlet when not in
:
Keep the cord away from heated