Installing The Casters - Husky HOTC8010BB1S Guía De Uso Y Cuidado

Assembly (continued)
5
Installing the drawer liner
□ Place the drawer liners (L) in appropriately sized drawers
and the chest lid area to protect the surface.
L
7
Installing the handles on the side locker
□ Remove the handles (A) from the top chest (B) by loosening
the bolts (BB).
□ Attach the handles (A) to the side locker (O) by using two
bolts (BB) for each handle.
□ Tighten all bolts securely with a screwdriver.
BB
A
O
B
6

Installing the casters

CAUTION: Do not over tighten the screws.
□
Lay the side locker (O) on its back. Use the packaging
material to protect the finish.
□
Mount the two swivel casters with brake (G) to the
side locker (O) by using four bolts (CC) per caster. The
s wivel casters with brake (G) should be installed on the
end of side locker (O).
□
Tighten all bolts with a wrench (EE).
CC
EE
8
Attaching the side locker to the cabinet
NOTE: Two people may be required to complete this step.
□ Screw the bolts (CC) on the top chest (B) and rolling
cabinet (E).
□ Return the side locker (O) to its upright position.
□
Clip the side locker (O) to the bolts on the left side
of the top chest (B) and rolling cabinet (E).
□ Pull the side locker (O) down to ensure it is well mounted.
O
7
Pleas e contac t 1-888-HD-HUSK Y fo r furthe r assistance .
G
Do not fully tighten bolts at this time.
CC
HUSKYTOOLS.COM
O
B
E