Attaching Metal Base - peerless-AV SC550 Instalación Y Ensamblaje

Attaching Metal Base

Attach front casters (F) to front of metal base (C) with four M6 x 8mm screws (J), four M6 washers (N).
1
Attach rear casters (G) to rear of metal base (C) with four M6 x 8mm screws (J), four M6 washers (N).
NOTE: Lock brakes on casters, for no sudden movements during installation.
Remove two M6 x 20mm socket screws from support bar (I).
2
Attach column support bar (I) to metal base (C) with the two M6 x 20mm socket screws.
NOTE: Make sure curved edges of column support bar (I) are pointing toward the front of the cart as shown in
detail 1.
I
C
M6 x 20mm SCREW
J
N
G
C
5 of 35
ISSUED: 02-25-11 SHEET #: 009-9048-3 09-09-13
F
I
DETAIL 1
TOP VIEW
C