Playback In Scan Mode; Playback From A Specified Chapter/Track Or A Specified Time; Playback In Random; Playback In Different View-Angle - Lenco CS-470 DVD Manual De Instrucciones

4.11 Playback in Scan Mode

1. In the state of VCD(PBC OFF)/CD playing, press the INT button to play the previous 15 seconds part of
each track on the disc. Press the INT button again to resume normal playback.
2. In the state of DVD/MP3/WMA playing, the INT button is not available.

4.12 Playback from a specified chapter/track or a specified time

1. In the state of DVD playing, press the SEARCH button to display a interface and highlight the title item,
then use the number buttons to input the serial number of the title; use the direction buttons to highlight
the chapter item, then use the number buttons to input the serial number of the chapter; you can still use
the direction buttons to highlight the time item, then use the number buttons to input the desired time to
start playback; finally press the OK or PLAY button to play the selected chapter or play from the selected
time.
2. In the state of VCD/MP3/WMA/CD playing, press the SEARCH button to display a interface and highlight
the track item, then use the number buttons to input the serial number of the track; you can still use the
direction buttons to highlight the time item, then use the number buttons to input the desired time to start
playback; finally press the OK or PLAY button to play the selected track or play from the selected time.

4.13 Playback in Random

In the state of DVD/VCD(PBC OFF)/MP3/WMA/CD playing, press the RDM button to switch between
RANDOM (ON)/RANDOM OFF. When in RANDOM (ON) mode, it will play in random.

4.14 Playback in Different View-Angle

1. In the state of VCD/MP3/WMA/CD playing, the VIEW-ANGLE button on the IR remote control is not
available.
2. In the state of DVD playing, press the VIEW-ANGLE button repeatedly on the IR remote control to view in
different angle.(This function is only for the DVD media with ANGLE function)

4.15 Playback in Zoom Mode

In video/image mode, during playback, press the ZOOM button continuously to enlarge a certain area of
the images on the screen with these multiples:
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF.
Press one of the ^/v/>/< buttons to select the area you want to enlarge.

4.16 Change the Caption Language

In the state of DVD playing, press the SUBTITLE button repeatedly to select the language of the caption
or turn off the caption.(depend on the media used.)
In the state of VCD/MP3/WMA/CD playing, the button is not available.
15