Velleman VM161 Manual Del Usuario página 6

Operation
4. Learning the remote to the VM161 controller
make sure that all VM161 controllers that need to respond to the remote are turned on (turn off all others if
necessary)
keep button 'on/off' pressed until the led lights
briefly press button '3' (the led wil blink 3x times)
choose an address between 1 and 8 by pressing the corresponding button briefly
press button 'on/off' twice to confirm the setting (the led will turn off)
Operation
6
Press button 1 ... 7 to choose the colour.
1 : red
2 : green
3 : blue
4 : yellow
5 : light blue
6 : pink
7 : white
Press and hold button 8 to dim the output.
Dimming direction changes at release.