Andis BTF Instrucciones De Uso Y Cuidado página 3

6. Do not use outdoors or operate when aerosol (spray)
products are being used or where oxygen is being
administered.
7. Do not use this appliance with a damaged or broken
blade or comb as injury to the skin may occur.
8. Always attach plug to appliance first, then to outlet.
To disconnect, turn all controls to "off" then remove plug
from outlet.
9. Adjust voltage setting before connecting appliance to
outlet.
10. Plug charger directly into receptacle – do not use an
extension cord.
11. Unplug charger before plugging or unplugging appliance.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR PROFESSIONAL USE
OPERATING INSTRUCTIONS
To start trimmer, move ON/OFF switch button to ON position, to stop,
move switch button back to original position.
CHARGING UNIT
The trimmer is not charged at the factory. Please charge trimmer for
12 hours (overnight) before first use for maximum performance.
Remove trimmer and AC adapter from carton. The dual voltage adapter will
have to be set manually to the correct voltage before plugging into an
electrical outlet. In the U.S.A., adapter must be at 120V setting (Figure A).
Plug adapter into a 120V (or 240V AC outlet, as according to your local
power standards). Note that the trimmer ON/OFF switch must be in the OFF
position for the battery to charge. Plug adapter cord directly into bottom of
the trimmer (Figure B). The green light on the trimmer will turn on.
You can keep the trimmer plugged into the adapter when not in use. The
adapter will maintain the battery at full charge and the green light will stay
on. The unit has a nickel metal hydride battery that cannot be damaged by
overcharging. However, we recommend that the adapter be unplugged if
the trimmer won't be used for seven or more days.
3