Setting The Clock; Setting The Alarm Time; Activating The Alarm - Eton SOUND 100 El Manual Del Propietario

SETTING THE CLOCK

The clock is a 24-hour clock, showing AM and PM in the display.
1. Press the radio's or the remote's TIME SET button for 3 seconds;
note that the minutes flash.
2. Use the radio's TUNING/SET buttons or the remote's TUNE +/-
buttons to set the minutes.
3. Give the radio's or the remote's TIME SET button a quick, short
press; note that the hour flashes.
4. Use the radio's TUNING/SET buttons or the remote's TUNE +/-
buttons to set the correct hour.
5. Press the radio's or the remote's TIME SET button to complete the
new time setting and to exit the time set mode.

SETTING THE ALARM TIME

1. Press the radio's or the remote's ALARM button for 3 seconds;
note that the hour flashes.
2. Use the radio's TUNING/SET buttons or the remote's TUNE +/-
buttons to set the desired wake-up hour.
3. Give the radio's or the remote's ALARM button a quick, short press;
note that the minutes flash.
4. Use the radio's TUNING/SET buttons or the remote's TUNE +/-
buttons to set the correct minutes.
5. Press the radio's or the remote's ALARM button; note that the
speaker symbol flashes for 5 seconds and then disappears. The
alarm time is now set; when activated it will function for one hour.

ACTIVATING THE ALARM

The alarm functions for one hour. For the alarm to function it must
be activated. To do this, use quick, short presses of the radio's or
the remote's ALARM button, causing the following to appear in the
display:
6
SOUND 100 OWNER'S MANUAL