Cleaning And Maintenance; Overheating Protection - Saivod FR-215 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Remove lid and lift Frying Basket and hang basket onto the edge of oil container, to remove the
excess grease.
When finished cooking, make sure thermostat knob in Min position.

CLEANING AND MAINTENANCE

Always pull out the plug from the mains socket before cleaning and wait until the unit has cooled
down.
Do not use any wire brush or other abrasive objects.
Do not use any acidic or abrasive detergents.
Under no circumstances should the device be immersed in water for cleaning.
In order to change the oil, pull out the deep frying fat container and pour the oil out at the side.
Clean the deep frying fat container, the lid and the housing with a damp cloth and household
detergent if necessary.
Please do not immerse in water.
The deep frying basket can be cleaned in the usual way in soapy water.
Clean the housing after use with a slightly damp cloth.
TROUBLE SHOOTING
Check the mains connection.
Check the position of the thermostat.
The device is fitted with a safety switch (7). This prevents the heater being switched on accidentally.
Check that the control element is correctly in place.

OVERHEATING PROTECTION

If you should accidentally switch on your deep fat fryer when there is no oil or fat in it the
overheating protection is automatically turned on. The appliance is no longer ready to be used.
Unplug the deep fryer.
Only after the device has been left to cool down completely should the "RESTART" button (8) on the
rear of the control element be operated in order to use the deep fat fryer again.
For this you should use a plastic or wooden object that is the least 4 cm long.
FR-215.indd 24
5/19/2016 7:03:20 PM

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido