Krups KX7000 Manual De Instrucciones página 54

TROUBLESHOOTING GUIDE FOR BREAD
Not getting the expected results? This table will help you.
The key was pressed
during baking
Not enough flour
Too much flour
Not enough yeast
Too much yeast
Not enough water
Too much water
Not enough sugar
Poor quality flour
Wrong proportions
of ingredients (too much)
Water too hot
Water too cold
Wrong programme
TECHNICAL TROUBLESHOOTING GUIDE
PROBLEMS
The kneading paddle is stuck in the pan • Let it soak before removing it.
The kneading paddle is stuck
in the bread
After pressing on
After pressing on
takes place
After a delayed start, the bread
has not risen enough
or nothing happens
Burnt smell
54
All manuals and user guides at all-guides.com
Bread Bread falls
rises too after rising
much
SOLUTIONS
• Lightly oil the kneading paddle before adding the ingredients
to the pan.
nothing happens • The appliance is too hot. The following error message
will be shown: E01 + 5 beeps. Wait 1 hour between 2 cycles.
If a different error message is being displayed, please take
your equipment to an approved service centre.
• A delayed start has been programmed.
• The programme includes preheating.
but no kneading • The pan has not been correctly inserted.
• Kneading paddle missing or not installed properly.
• You forgot to press on
delayed start programme.
• The yeast has come into contact with salt and/or water.
• Kneading paddle missing.
• Some of the ingredients have fallen outside the pan: let the machine
cool down and clean the inside of the machine with a damp sponge
and without any cleaning product.
• The preparation has overflowed: the quantity of ingredients used
is too great, notably liquid. Follow the proportions given in the recipe.
Bread does
not rise
too much enough
after programming
Crust not Sides brown
golden but bread not
enough fully cooked
Top
and sides
floury