Random Play - Grundig RCD 1500 BT Manual De Instrucciones

CD­MODE­ _ ___________________________________
Random­play
1­
During playback, press MODE/MONO/ST. button
three time until the display showing RND. The tracks of
the disc will be played in random order.
2­
To terminate the function, press this button once.
Creating­a­track­memory
You can create a track memory of up to 20 tracks for
the current CD in any order you choose and then play
them back in that sequence. A track may be stored
more than once. Program is only possible in the stop
position.
Selecting­and­storing­tracks
1
Press »PROG/MEM/STOP« to call up the function.
in stop mode.
2 Select the track by pressing
button
3 Press »PROG/MEM/STOP« button to save the
track into the program list.
4 To store more tracks, repeat steps
Playing­back­a­track­memory
1 Start the track memory by pressing
PAUSE«.
– Playback begins with the first programmed file or
track.
2
Press »PROG/MEM/STOP­
playback.
3 To play the track memory again, press
»PROG/MEM/STOP« button once, then press
»PLAY/PAUSE «.
Changing­the­track­selection
1
In stop mode, keep briefly pressing
MEM/STOP« button until program number you
want to replace appears in the display.
2 Select the number of the new track by pressing
»DOWN­ « or »UP­
26­
ENGLISH
»DOWN­ « or »UP­
2 to 3.
»PLAY/
.« button to end
»PROG/
«.
3 Press »PROG/MEM/STOP« to save the new track.
Adding­tracks
1
In stop mode, press »PROG/MEM/STOP« until
the last program number is shown in the display.
2 Select the number of the new track by pressing
»DOWN­ « or »UP­
3 Press »PROG/MEM/STOP« to save the new track.
Deleting­the­track­memory
The device must be in the stop position.
1 Press »OPEN/CLOSE« to open the CD compart-
ment
or
and hold the »PROG/MEM/STOP« button while
programming.
«.button