Grundig RCD 1500 BT Manual De Instrucciones página 29

USB­MODE­ __________________________________
The device supports most MP3 Player or USB memory
sticks.
Note:
The device must be switched off while the USB
7
connection is being made. If it is not switched off,
data can be lost.
Connecting­a­MP3­Player­or­an­USB­
memory­stick
1 ON/OFF
Press the button to power off the device.
2 Connect the USB interface of the MP3 player to the
»USB« socket on the device using a standard USB
cable;
or
insert the USB plug of the USB memory stick in the
»USB« socket on the device.
Notes:
To remove the MP3 player or the USB memory
7
stick, switch off the device and pull out the cable
for the data medium.
The USB socket on the device does not support a
7
connection for a USB extension cable and is not
designed for directly connecting to a computer.
Selecting­the­USB­input­source
For MP3/WMA mode with MP3 player or USB
memory stick, the same playback and search functions
are available as for MP3 mode (see MP3 Mode
section).
1
Power on the device by pressing the
ton.
e
2 II« to start playback.
Press »
– Playback begins with the first track.
3 Press »PROG/MEM/STOP­« to end playback.
Notes:
The USB socket of this device is a standard
7
Caution:
7
7
7
ON/OFF
but-
socket. Due to rapid development in technology
and new manufacturers appearing every day,
the compatibility of USB memory sticks can only
be partially guaranteed. If USB operation is
impaired or is not possible, this does not indicate
a malfunction of the device.
Bi–directional data transfer as defined for
ITE devices in EN 55022/EN 555024 is not
possible.
USB transfer is not in itself an operating mode. It is
only an additional function.
Never remove and USB devices during operation.
This can damage the USB device and the device.
This type of damage will invalidate your warranty.
29­
ENGLISH