Sauder Cottage Road 418072 Instrucciones De Montaje página 8

Step 4
Turn four BLACK 9/16" FLAT HEAD SCREWS (32S) into
å
the ENDS (A and B) until the shoulders of the SCREWS
rest on the surfaces of the ENDS.
Slide the END MOLDINGS (U) onto the ENDS (A and B).
å
Line up the grooves in the MOLDINGS over the heads of
the SCREWS in the ENDS.
These edges
should be even.
U
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
Page 8
Groove
B
Shoulder
A
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
418072
Some assembly
(and snacks) required.
These edges
should be even.
Shoulder
Apply pressure with your hands
32S
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
www.sauder.com/services
U