Horizon Global 76227 Instrucciones De Instalación página 6

7. Trim Fascia- Using a marker and tape measure make a 4 ½ by 4 inch box on
the bottom/center of the fascia to trim. To find the center of the fascia
measure 2 inches (toward the driver side of the fascia) from the of the
middle hole on the fascia and mark the centerline. Make a mark 2 inches on
each side of the centerline. Measure 4 ½ inches from the forward edge of
the fascia. *SEE FIGURE 2
4"
4 ½"
2"
C L
4 ½"
4"
8. Install Fascia- Reversing the order in step 1 reinstall the tail light, fascia and mud flaps (if equipped).
a
b
a
a
c
d
©2018 Horizon Global™ Corp. - Printed in Mexico Sheet 6 of 18 76227NP 05-08-18 Rev. B