Steren STV-100 Manual De Instrucciones página 12

IMPORTANT
• The bracket should be installed on walls to withstand earthquakes or
prolonged periods of vibration.
• During assembly, use only the parts supplied and attach them firmly.
• Do not miss any piece during assembly. Install all parts as directed.
• Do not modify any parts.
• Take special care when installing on a wall because of its weight.
•When installed in a concrete wall be sure to use proper anchors.
• Install with at least two people.
• Choose a straight wall to fix the screen securely.
• Place a protective cover on the surface it will work while handling the
plasma display and support unit in the wall.
• After installation, make sure the unit is firmly attached.
• During installation, leave at least 15 cm free around the screen.
• If you don´t leave enough space, the display could overheat, which can
cause fire or damage to the unit.
3