Bracket Installation - Steren STV-100 Manual De Instrucciones

2. BRACKET INSTALLATION

1. Locate the place where you want to install the screen.
2. Place the wall plate over the wall, and mark where you need to drill holes for
a secure installation.
3. Once you made the holes, insert anchors "G" in each one.
4. Place the wall plate over the holes and insert screws "H" and washers "I",
make sure to tight them firmly.
I
H
The black plate is placed
correctly only if the bubble is in
middle of the two lines.
It is recommended that this step is done, for safety, between two people.
5