Casals VMP1050EM Manual Del Usuario página 11

• To unscrew, set the direction to counter clockwise (CCW).
• The appliance should not be in use when changing the screwing
direction.
HAMMER DRILLING WITH ROTATION
• Turn the selector (C) until points to (
CHISELING
• Turn the selector (C) until points to (
• To modify the position of the chisel turn the selector (C) until points
to moving function. Rotate the chisel until the desired position and
turn the selector (C) until points to (
LOCKING BUTTON:
• Activating the locking button allows you to operate the appliance
without having to depress the run button.
• To activate this function press button (J) while holding down the run
button.
• To deactivate this function, press the run button right down.
HOW TO SELECT THE DIRECTION OF THE ROTATION
• Do not change the direction of the rotation whilst the tool motor is
in operation.
• The appliance has a selector (D), which allows the direction of
rotation to be changed.
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
• Stop the appliance by releasing the pressure on the on/off button.
• Clean the appliance.
CLEANING
• Disconnect the appliance from the mains and allow it to cool before
undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops of wash-
)
)
)