Before Use - Casals VMP1050EM Manual Del Usuario

DESCRIPTION
A Drill chuck (SDS-Plus)
B Chuck sliding ring
C Drilling / Hammer Drilling Selector
D Rotation direction switch
E Auxiliary handle
F Depth Gauge
G Cooling vents
H Start-up switch
I Variable speed button
J Locking Button
If the model of your appliance does not have the accessories
described above, they can also be bought separately from the Tech-
nical Assistance Service.
• Auxiliary Operation
• Operate the appliance only with the auxiliary handle.
• Turn the auxiliary handle in counter clockwise direction for adjust-
ment (E)
• Set the auxiliary handle on the appliance into the required position.
• Tighten the auxiliary handle (E) by turning it in clockwise direction.
• The depth can be set with the depth stop (F). Thereby loosen the
winged screw.
• Set de required drilling depth.
• Tighten the winged screw.
INSTRUCTIONS FOR USE

BEFORE USE:

• Make sure that all the product's packaging has been removed.
• Ensure that the voltage indicated on the rating label matches the
mains voltage before plugging in the appliance.
• Prepare the appliance according to the function you wish to use:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.