Setup Menu - Pioneer FH-S725BT Guia De Inicio Rapido

Frequently used operations
Purpose
Turn on the power* Press SRC/OFF to turn on
the power.
Press and hold SRC/OFF to
turn off the power.
Adjust the volume Turn the M.C. dial.
Select a source Press SRC/OFF repeatedly.
Change the display Press DISP/DISP OFF
information repeatedly.
Press and hold DISP/DISP
OFF to turn off the display
information.
Return to the previous Press BAND/
display/list
Return to the normal display Press and hold BAND/
from the menu
Change the display Press and hold BAND/
brightness
Answering a call Press any button.
Ending a call Press
Boost the bass level Press BASS.
• You can select the bass
level ([HI] or [LOW]) in
[D.BASS].
* When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal,
the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the
source off.

Setup menu

When you turn the ignition switch to ON after installation, the setup menu appears in
the display.
4
En
Operation
Head Unit Remote Control
Press SRC to turn on the
power.
Press and hold SRC to turn
off the power.
Press VOLUME + or –.
Press MUTE to mute the
unit. Press MUTE again or
press VOLUME + or – to
unmute.
Press SRC repeatedly.
Press DISP repeatedly.
. Press / to select the
next/previous folder.
.
–
.
–
Press .
. Press .
–
WARNING
(Only for FH-S725BT)
Do not use the unit in standard mode when a speaker system for network mode is connected to the
unit. Do not use the unit in network mode when a speaker system for standard mode is connected to
the unit. This may cause damage to the speakers.
1
Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item Description
LANGUAGE Select the language to display the text information from a
compressed audio file.
[ENG](English),
[ESP](Spanish)
CLOCK SET Set the clock.
1 Turn the M.C. dial to adjust the hour, then press to confirm.
The indicator moves to the minute setting automatically.
2 Turn the M.C. dial to adjust the minute, then press to confirm.
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
AM STEP Select the AM tuning step from 10 kHz or 9 kHz.
[10], [9]
SPEAKER MODE (Only Switch between two operation modes: the 2-way network mode
for FH-S725BT) (NETWORK) and the standard mode (STANDARD) according to
the connections you have established.
After selecting the appropriate mode, turn the M.C. dial to
select [YES], then press to confirm.
• You cannot complete the setup menu without setting the
[SPEAKER MODE].
2
[QUIT :YES] appears.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO],
then press to confirm.
3
Press the M.C. dial to confirm the settings.