Using Pioneer Smart Sync/App; Listening To Spotify - Pioneer FH-S725BT Guia De Inicio Rapido

Basic operations
Purpose
End a call
Reject an incoming call
Voice recognition
(iPhone function is not available for FH-S525BT.)
This function is only available when an iPhone/Android device equipped with voice
recognition is connected to the unit via Bluetooth.
1
Press and hold and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press BAND/
Spotify®
(Not available when [USB MTP] is set to [ON] in the SYSTEM settings.)

Listening to Spotify

(iPhone function is not available for FH-S525BT.)
Update the firmware of the Spotify application to the latest version before use.
1
Connect this unit with the mobile device.
• iPhone via USB (page 5)
• iPhone/Android device via Bluetooth (page 5)
2
Press SRC/OFF to select [SPOTIFY].
3
Press and hold 1/ to display [APP CONTROL].
4
Turn the M.C. dial to select one of the below.
• Select [WIRED] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
5
Press SRC/OFF to select [SPOTIFY].
6
Launch the Spotify application on the mobile device and start playback.
6
En
Operation
Press .
Press and hold when a call is received.
.

Using Pioneer Smart Sync/APP

WARNING
Do not attempt to operate the application while driving. Make sure to pull off the road and park your
vehicle in a safe location before attempting to use the controls on the application.
TIP
It is recommended to enter the search term "Pioneer Smart Sync" in the search field to search for the
application.
Making a connection with Pioneer Smart Sync
(iPhone function is not available for FH-S525BT.)
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [SYSTEM], then press to confirm.
3
Turn the M.C. dial to select [APP CONTROL], then press to confirm.
4
Turn the M.C. dial to select one of the below.
• Select [WIRED] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
5
Turn the M.C. dial to select [AUTO APP CONN], then press to confirm.
6
Turn the M.C. dial to select [ON], then press to confirm.
7
Connect this unit with the mobile device.
• iPhone/Android device via USB (page 5)
• iPhone/Android device via Bluetooth (page 5)
Pioneer Smart Sync on the device starts automatically.
NOTE
Regardless of whether the [AUTO APP CONN] setting is set to [ON] or [OFF], you can
also perform the following to start Pioneer Smart Sync.
• For devices other than the USB-connected Android device, press SRC/OFF to select
any source and press and hold the M.C. dial.
• For iPhone, launch Pioneer Smart Sync on the mobile device.