Baxi SB-4X Instrucciones De Instalación, Montaje Y Funcionamiento página 13

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Faults
Pump does not
start.
Pump is mak-
ing noises.
NOTE: If you cannot remedy the fault, contact a specialist
retailer.
6 Disposal
Damage to the environment and risks to personal health
are avoided by the proper disposal and appropriate recy-
cling of this product.
• Use public or private disposal organisations when dispos-
ing of the entire product or part of the product.
• For more information on proper disposal, please contact
your local council or waste disposal office or the supplier
from whom you obtained the product.
Causes
Interruption in the power
supply, short- circuit or
defective fuses.
Motor is blocked, e.g. by
deposits from the water
mains.
Motor scraping, e.g.
through deposits from the
water mains.
Running dry, too little
water.
Air in the pump.
Remedies
Have the power supply
checked by a qualified
electrician.
Have the pump
removed by a qualified
technician → Page 16.
Check that the impeller
can move by turning it
and rinse out the dirt
that has accumulated.
Check the check
valves, they must be
fully open.
Switch the pump on/off
5 times for 30 s in each
case.
English
19

Publicidad

Tabla de contenido
loading

Tabla de contenido