Electrical Requirements; Performance Chart; Tools Required - Everbilt HDEFR50W Manual Del Usuario

Pre-Installation (continued)

ELECTRICAL REQUIREMENTS

□ Connect the pump to an individual branch circuit with no other outlets or equipment in the circuit.
□ Size fuses or circuit breakers according to this chart:
HP Voltage
1/2 115

PERFORMANCE CHART

SKU HP
1004 118 476 1/2
SPECIFICATIONS
Power supply
Liquid temperature range
Discharge size
Sump basin
Switch on/off

TOOLS REQUIRED

Flathead
screwdriver
Pipe wrench
Individual Branch Circuit Required (Amps)
GPM of Water @ Total Feet of Lift
0 ft. 5 ft.
64 58
115 V, 60 Hz, 15 Amp circuit
32º – 131ºF (0º – 55ºC)
2 in. FNPT
Minimum 18 in. (460 mm) diameter, 30 in. (760 mm) depth
ON: 17 in., OFF: 9.91 in.
Phillips
screwdriver
Channel locks
15
10 ft. 15 ft.
53 47
Safety goggles
Tape measure
5
Please contact 1-844-883-1872 for further assistance.
Max. Lift
20 ft.
40 38 ft.
Cable Ties
Hacksaw
HOMEDEPOT.COM