This is how you set up your Skotti
5.3
Inserting the grill rack
To insert the grill rack, proceed as follows:
3
2
5.4
Grilling with charcoal or wood
Possible risk of fire due to incorrect use.
Never use the burner pipe to ignite charcoal or wood.
`
Never put Skotti on the carrier bag when using charcoal or wood
`
because those fires burn at higher temperatures.
To operate Skotti with charcoal or wood, proceed as follows:
6� Before grilling with charcoal or wood, take off the burner pipe (3)
1�
and the baffle plate (2).
7� Put the grill rack (1) on Skotti only with a low flame.
2�
You can now operate Skotti with charcoal or wood.
9
Tip
To protect the environment, we recommend that you operate Skotti
`
exclusively with gas.
1� Place Skotti in front of you, with the round end of
the burner pipe (3) pointing to the right.
2� Take the grill rack (1) with the Skotti logo on the
1
bottom right.
3� Insert the grill rack (1) into the corresponding slots
on the right side.
4� Let the rack (1) slide into the slots on the left side.
3
5� Carefully pull the grill rack (1) back at the tabs,
towards the right.
Once you hear it snap, the grill is locked and
9
stable.
10