Steren AUT-510 Manual De Instrucciones página 3

ON/OFF MODE
Connect your Bluetooth hands-free speaker to the car's cigarette lighter adaptor and start your car.
The LED indicator light will blink green. In order to power your Bluetooth hands-free speaker on, press
and hold the multifunction button for three seconds until you hear a short tone. In order to power it off,
press and hold the multifunction button until the LED indicator light powers off.
SYNCHRONIZING WITH A BLUETOOTH CELLULAR PHONE
I
n order to synchronize two devices, they must be no more than three feet apart.
1. Connect your Bluetooth hands-free speaker to your car's cigarette lighter adaptor input and start your
car.
2. Your Bluetooth hands-free speaker will power on and the LED indicator light will blink green. Press
and hold the multifunction button for three seconds in order to power your Bluetooth hands-free speaker
off. The LED indicator light will power off.
3. Activate the Bluetooth function on your cellular phone.
4. Press and hold the multifunction button for six seconds until you hear a long tone. The LED indicator
light will stay fixed green. The device is now ready to be synchronized.
5. On your cellular phone, begin a search for Bluetooth devices.
6. When your cellular phone finds the Bluetooth hands-free speaker, "AUT-510" will appear on your screen.
7. Select "AUT-510" on your cellular phone.
8. Dial the password "0000" (four zeroes) on your cellular phone and press the OK button.
9. When you have finished this process, you will hear a long tone and the LED indicator light will blink
green three times indicating that it is in standby mode.
The synchronization between your cellular phone and your Bluetooth hands-free speaker must
take place in a span of no more than two minutes. Otherwise, you must start the process over.
For more information, consult your cellular phone's instruction manual for instructions on
Bluetooth setup.
ENGLISH-03