In order to answer a call, wait for the call tone on your Bluetooth hands-free speaker, and then press the
multifunction button once. You will hear a short tone and then you can begin speaking. In order to finish
this call, press the multifunction button once again and you will hear a short tone.
When you hear the call tone, press and hold the multifunction button for three seconds until you hear a
short tone. A "line busy" message will be sent (this may vary depending on the cellular phone model and
the service provider).
If your cellular phone has voice dialing capabilities, in standby mode, press the multifunction button and
you will hear a tone. After this tone speak your programmed command for dialing
For more information on voice dialing, consult your cellular phones instruction manual
If you wish to redial the last number dialed, press the multifunction button two times continuously.
During your phone conversation, turn the dial to the right in order to increase the volume level and to the
left in order to decrease the volume level. Use this dial according to your volume needs.
Bluetooth Specifications
Distance Range
Operating Frequency
Input Voltage
Dimensions
Weight
Product design and specifications are subject to change without previous notice.
ANSWERING AN INCOMING CALL
REJECTING AN INCOMING CALL
VOICE DIALING
REDIALING
ADJUSTING THE VOLUME
SPECIFICATIONS
ENGLISH-04
Class 2 Version 1.2
32 feet
2.402 to 2.480 GHz
12-24 V ---
6.1 x 2.2 x 1.2 in.
2.4 oz.