General Safety Rules; Personal Safety Rules - BGS technic 2169 Manual De Instrucciones

SAFE USE OF THE INDUCTION HEATER

General Safety Rules


Please be sure to read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire, and / or serious personal injury.

Please ensure that the work area is well ventilated, dry and clear of obstacles.

Always keep the work area clean and well illuminated.

Keep bystanders, children, visitors and animals away while operating the INDUCTION HEATER,
these may create distractions.

Keep a fully charged fire extinguisher or Fire Blanket at hand at all times when using the
INDUCTION HEATER.

Ensure no flammable products are near the work area while using the INDUCTION HEATER

Personal Safety Rules


If you have a cardiac pacemaker or any other kind of electronic or metal surgical implant DO NOT
operate the INDUCTION HEATER, and always stay at least 1 metre (three feet) away from
anybody operating INDUCTION HEATER.

Although the magnetic fields emitted by the tool only travel a few inches, they pose a dangerous
risk to the proper operation of all implanted medical Electronic devices in the user and any
bystanders.

Do not use the INDUCTION HEATER within 150mm (6 inches) of any air bag component. The
heat created by the INDUCTION HEATER can ignite the air bag squib propellant causing it to
explode without warning. Refer to the vehicles service manual for precise air bag location before
operating.

Coils, rope coils and Body Pads will be hot after use, please take great care when fitting /
removing.

Do not operate the INDUCTION HEATER while under the influence of drugs, alcohol or any
medication.

Do not operate the INDUCTION HEATER while wearing any metallic items such as jewellery,
(including rings, watches, chains, identification tags, body piercing) or belt buckles. The
INDUCTION HEATER can heat these metallic objects very quickly and cause serious burns or
even ignite clothing.

Remove all loose coins, keys, chains, pocket knives, miniature tools, or any other metallic object
in, or, on your clothing before operating the INDUCTION HEATER. The INDUCTION HEATER
can heat these metallic objects very quickly and cause serious burns or even ignite clothing.

Do not wear clothing that contains metallic rivets, waistband buttons, pocket buttons or zips when
operating the INDUCTION HEATER. The INDUCTION HEATER can heat these metallic objects
very quickly and cause serious burns or even ignite clothing

Always wear safety goggles when using the INDUCTION HEATER.

Fumes and smoke from hot/burning adhesives are toxic. Wear an appropriate dual filter (dust and
fume) mask

Wear heat-resistant gloves when using the INDUCTION HEATER. The INDUCTION HEATER
heats metal very quickly. You can easily burn your hands and fingers when trying to remove parts
from hot metal surfaces.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
2
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed